KF flange, diffusion type

廣州儒瑞科技有限公司位于美麗的廣州番禺區石基鎮，致力于電子漿料行業及實驗室設備業的發展，專業從事電子銀漿，球磨機、高溫爐、手套箱、凝膠電脈測試系統等設備的研究、開發、制造及銷售，憑借公司強大的技術力量和經濟實力，不斷開發出具有國際先進技術水平的新產品。公司電子漿料廣泛適用于電子元器件行業公司，設備儀器適用高校、企業的實驗室及生產線。

　　公司本著質量第一、客戶至上的原則為廣大用戶提供滿意的服務。

 KF flange, diffusion type

Compact, easy installation

Long life zirconia sensor

Five to ten years expected operational life

Sensor will not dry out or freeze

Low maintenance

Low cost

 

Caution:

Never expose the KF sensor to flammable gases.

Please install the KF sensor horizontal.

The KF sensor needs a circulation inside the glove box.

Please keep the power at right voltage.

 

Description:

The OK series transmitter is a cost effective solution in a small package for oxygen measurement and control applications. It is compact, cheap and easy installation and designed to provide the trained engineers with useful information relating to the concentration of oxygen in non-flammable gases and non-hazardous area. Its microprocessor based main board can offer accurately output for trace levels oxygen concentration. It is ideally suited for installed in inert chamber or glove box at normal atmosphere.

 

Technical parameters:

Measuring Range: 0-1000ppm

Sensor Type: Zirconia Oxygen Sensor

Accuracy: ±2% of Span Gas

Response Time: Approximately 6 sec. for T95

Installation: KF Flange

Measuring Type: Diffusion

Operating Temperature: 0° to 45° C (32 - 113° F) Steady State

Operating Humidity: 0-90% Non-condensing

Operating Pressure: Normal Atmosphere

Calibration@ 1% v/ min*:Span/ Zero or Span/ Middle/ Zero Gas

Analog Output: 4-20mA or 20-4mA Selectable

Digital Interface: RS485 for Calibration/ Setting

Power: 12.0 VDC

Power Consumption: Maximum 2A

1% v/ min* means the circulation rate is 1 liter/min in a 100 liters of glove box.

本頁產品地址：http://www.okbaiwei.com/sell/show-6060844.html