Aim-tti MX180T直流電源,TTi MX180T：Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, No Interfaces

深圳市深東金儀器有限公司早在1996年香港成立香港東金電子有限公司，在2006年10月28在深圳成立深圳市福田區華強廣場東金電子儀器經營部。我們以銷售電子測量儀器儀表為主要業務，為客戶提供zui新型、高品質的測試儀器。并以合理的價格、完善的售前及售后服務，使客戶得到平等、互惠的對待。我司的銷售人員擁有多年從事儀器行業銷售的工作經驗，能為您們提供專業的意見和分析，我們擁有豐富維修經驗豐富的工程師為您們提供技術支持與技術培訓;可以快捷地幫客戶解決測試方面的問題。同時我公司也系統集成方案的供應商，曾為多家大型上市公司設計中央系統集成方案也很好地解決了客戶長期解決不了的生產測試難題，也節省了生產的成本；也在行業中樹立了良好的口碑。

深圳市深東金儀器有限公司主營：數字/模擬電視中央信號源、數字信號源/發生器/碼流卡、電視信號發生器、示波器、音視頻分析儀、安規測試儀、EMC測試儀、LCR測試儀、GPS信號發生器，HDMI高清信號源，彩色分析儀，DMB-TH/DVB-T/ATSC/ISDB調制器與功率放大器、示波器電源等儀器；主營的品牌有：西班牙Promax、美國力科（LeCory）、德國偉視（WISI）、日本橫河（Yokogawa）、臺灣固緯（GWinstek）、日本菊水（KIKUSUI）、美國是德（安捷倫）、日本營電（EIDEN）、日本LEVEAR，英國比克PicoScope等；同時我公司還有自主品牌寶碼（Pro-instrument）是我司穩步發展的動力.

我們秉承“顧客至上，銳意進取”的經營理念，堅持“客戶一”的原則為廣大客戶提供優質的服務和geng好的測試方案，客戶的滿意就是我們前進的zui大動力。所以在互聯網發展迅猛的今天，我司在立足深圳，放眼世界，將我們的品牌服務做強做大，為客戶geng好地服務。您的滿意就是我們前進的zui大動力。

Aim-tti MX180T直流電源,TTi MX180T：
Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs,  2 x 180 watts plus 1 x 18 watts, No Interfaces

MX180T and MX180TP:

• 375 watts plus of total power
• Two high power outputs plus one low power output
• High power outputs each capable of 30 volts at 6 amps
• Range switching provides up to 120 volts or up to 20 amps
• Low power output provides up to 12 volts or up to 3 amps

• Three high performance outputs, two of 180 watts each and one of 18 watts
• Total power of 378 watts in a highly compact package
• Range switching gives up to 120 volts and up to 20 amps
• Twenty one range combinations for maximum flexibility
• Up to 360 watts from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of 1mV and 1mA
• Variable OVP and OCP trips on all outputs
• 50 setting memories per output + 50 linked memories
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense on all outputs
• Graphic LCD provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• Individual or combined output on/off control with programmable delay sequencing.
• Front panel locking with optional pass-code protection
• 3U half-rack case for bench or rack mounting
• GPIB, RS-232, USB and LAN (LXI) interfaces (MX180TP)

Aim-tti MX180T直流電源,TTi MX180T：
The MX180T has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A.

Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. Mixed-mode regulation To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.

Excellent line and load regulation is matched by low noise and good transient response. Range switching and power control To increase its ability to match a variety of applications, each output has more than one range.

Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1..

When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output. Remote control for system applications The MX180TP incorporates USB, RS232, GPIB and LXI compliant LAN interfaces.

These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.

Duplicate power and sense terminals are incorporated at the rear.

The compact half-rack 3U size uses  front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.

A 3U rack mount suitable for one or two units is available.
Aim-tti MX180T直流電源,TTi MX180T：

DRIVER SOFTWARE SUPPLIED (MX180TP only)
IVI Driver	An IVI driver for Windows is supplied. This provides support for common applications such as LabView*, LabWindows*, HPVEE* etc.
USB Driver	An installation file is supplied which calls a standard Windows* USB driver.
* LabView and LabWindows are trademarks of National Instruments. * HPVEE (now Agilent VEE) is a trademark of Agilent Technologies. * USB interface is supported for Windows 2000, XP, Vista, 7 and 8 (including 64 bit versions). Windows is a trademark of Microsoft.

GENERAL SPECIFICATIONS
Input:
AC Input	110V to 240V AC ±10%, 50/60Hz. Installation Category II.
Input Power	600VA max.
Temperature & Environmental:
Operating Range	+5oC to +40oC, 20% to 80% RH
Storage Range	-40oC to + 70oC
Environmental	Indoor use at altitudes up to 2000m, Pollution Degree 2.
Cooling	Intelligent variable-speed fans.
Safety & EMC:
Safety	Complies with EN61010-1
EMC	Complies with EN61326

本頁產品地址：http://www.okbaiwei.com/sell/show-7178785.html