ERICHSEN 435S附著力測試儀Method of OperationAfter checking the tight fixing of the test body at theend of the load trans

珠海天創儀器有限公司是專業從事儀器儀表設備代理、銷售與服務工作的高科技企業。天創儀器致力于把國外的先進高科技產品在國內迅速推廣與應用，與國外著名儀器儀表生產廠商有著廣泛的技術與銷售合作的良好基礎，并作為美國泛美、美國雷泰、美國福祿克、德國K.K、德國EPK、德國儀力信、德國菲希爾、德國德圖、日本美能達、日本日置、英國易高等公司的中國銷售代理商。

天創儀器擁有一支年輕有為、朝氣蓬勃的領導班子及技術人員，秉承“講誠信、重服務”的經營理念，以“一切為了客戶，為了客戶的一切”為宗旨，致力于國家儀器儀表產業的發展，同時愿意與儀器儀表相關技術領域中的相關人員、機構與企業進行各種形式合作！同時也竭誠歡迎國內、外客商前來洽談業務，愿與您精誠合作，共創輝煌未來！

ERICHSEN 435S附著力測試儀

Method of Operation
After checking the tight fixing of the test body at the
end of the load transmission bolt, the required force
is adjusted on the scale using the locking screw
slider. Then the Model 435 S is placed
perpendicularly onto the surface to be tested resp.
beside the applied raised coating to be tested, and is
pressed down so that the guide wheels touch the
surface. In this way the preset force acting upon the
test disc is fully effective on the test surface. The
instrument is now moved into the rolling direction the
wheels over the specimen to be tested e.g. against,
for example, scale lines.

As the diameter of the test head of Model 435 S is
considerably smaller compared with the steel disc of
Model 435, a central sector of the disc of Model 435
has been chosen as test body for reasons of space
saving. The test body is mounted on a bolt and is
preloaded by an internal helical spring to a force
adjustable from 0 to 20 N. When placing Model 435 S
with the two guide wheel perpendicularly onto the
surface, the rigidly arrested test body acts (with the
preset force) upon the surface. The test force can be
varied – as for Model 435 – by means of 3
exchangeable springs covering three different test
ranges.

本頁產品地址：http://www.okbaiwei.com/sell/show-401983.html